tren

B-Master Paintball Filling System

14.12.2023
62
B-Master Paintball Filling System

B-Master Paintball Filling System

B-MASTER MINI | B-MASTER MIDI | B-MASTER MAXI

For filling standard pressure vessels for paintball

Pressurized tube sizes: 0.8 l; 1.1 l; 1.5 1; 1.9 l

Filling pressures: 200 bar / 300 bar

The B-MASTER filling panel is primarily used for filling compressed air cartridges for paintball markers at high pressure ranges of 200 or 300 bar.

The B-MASTER filling panel is externally mounted, meaning that appropriate piping must be routed between the compressor and the filling panel.
Using a t-connector, the pressure supply line can be distributed to additional panels (when filling several cartridges at the same pressure).

The filling pressure in the pressure vessel is displayed by a pressure gauge in bar/psi.
On the B-MASTER MAXI the safety valve is installed as standard (as an option), so that the pressure supply does not have to be maintained here up to 200 or 300 bar.

The safety valve is adjusted at the factory. The high-performance filling valve is rust-proof and has a service life of several hundred thousand cycles.
The filling hose is automatically retrieved when you release the operating lever.
A silencer reduces the noise level generated.

The filling coupling fits all standard paintball nipples and is equipped with a check valve. The valve prevents the filling hose from moving in case of accidental operation without a marker attached.